Re: dfu-util for Windows
I had a look at this earlier today on a few different OS's.The Mac is explicitly checked for in the flashall.sh script, so it aborts when you attempt to run it on a 'darwin' OS. I then tried it on a...
View ArticleRe: Persisting wifi setup between reboots
Hi Banq, Let me know if you still have this issue after you reset it. Regards,Intel_Jesus
View ArticleClik here to view.
Re: Official Black-screen thread - We need your help!
Hello there, have had the same issue: connected a new iiyama Monitor to asus laptop via HDMI and got 'no signal'. Disabling and enabling the Intel HD 4000 graphics card helped, but after a restart had...
View ArticleRe: Intel Graphics refresh rate drop and are inconsistent after sleep or...
Please try the latest driver for your graphics controller:https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24329Kevin M
View ArticleRe: Yocto flash not working?
Capturing and reviewing the console output while you flash the board should give you a hint where and why it's failing. A few more things to consider:How are you powering the board?Could you be using...
View ArticleRe: Cannot enter F2 BIOS setup NUC DN2820FYK
I am not from Intel, but you may find that most BIOS since the original may require that the HDMI TV support 1024x768 resolution (at 60Hz?). On my displays this comes up as small display in center. I...
View ArticleRe: Disabling "Restore defaults" ctrl+alt+F8
@sylvia_intel, thanks, but it doesn't seem like any of the switches will do that. Would it be possible to contact the development group about it? Having no way to disable a global shortcut is an...
View ArticleRe: Intel SSD 520 Series Disconnecting/Reconnecting, what to do?
We would like to get as much information from your system as possible in order to investigate the disconnect issue. Kindly provide the motherboard model, processor, BIOS version, memory...
View ArticleRe: Intel® Iris™ and HD Graphics Driver update posted for Haswell and Broadwell
Hi Robert_U, Thanks for the driver update, and the detailed post explaining what's new. I'm afraid that the issue DirectX 10/11 games running in centred mode in fullscreen (Windows 8.1) does not appear...
View ArticleRe: HD P4600 Rebooting
@ zazou, what operating system are you using on the system? ThanksRobert
View ArticleRe: Getting started with sensors for Edison
Hi Diego, Thanks for your reply. I was wondering whether there were some sensors (microphone in particular) explicitly advertised as compatible with the Edison Module, similar to the SparkFun 9 degrees...
View ArticleRe: Image freezes, but the cursor moves freely
Kevin, I contacted the manufacturer and confirmed that the firmware on our Pioneer KRP 500M HDTVs is the most current firmware. In any event, how could this be a TV firmware issue, when there are a...
View ArticleClik here to view.
Re: widi screen freeze netgear ptv3000
Kevin, I contacted the manufacturer and confirmed that the firmware on our Pioneer KRP 500M HDTVs is the most current firmware. In any event, how could this be a TV firmware issue, when there are a...
View ArticleRe: Intel please optimize OpenGL driver on intel hd graphics(celeron)
Excuse me but new drivers dont solve my problem
View ArticleRe: Turning Edison into an iBeacon ...
PiotrB I'm was able to got my hands on the edison last week, I'm still on setting things up. But your question isn't edison specific. The bluetooth Header file ist part of the Bluez-dev package, so...
View ArticleRe: Flashall.sh and pre-built xFSTK
Hi Dave, Just sharing my experience:I'm using Ubuntu 14.04.1 LTS 64-bit to flash the default yocto build and also your ubilinux. I don't have problem running it. BTW, I don't even need xfstk when using...
View ArticleRe: Flashall.sh and pre-built xFSTK
If you stay with the Yocto image, you probably never need to run the recovery option with flashall. Because there's a different partitioning scheme with ubilinux, the '-b' option is required, which...
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
It look like booting is blocked when the WiFi is unreachable. I had my Edison connected to one WiFi network, and now I'm booting it up and wanting to connect it to another WiFi network. It is...
View ArticleRe: Windows ( 8.1 )updates keeps breaking my RAID 5.
yes I Just tried the 12.9 again and its still doeskin work ( altho I don't understand why it would when I have said that it doesn't work ). I also tried 13.5 and that as expected doesn't work either....
View Articleudp.parsePacket issues
Hi everyone, I am having a problem with udp.parsePacket. I am trying to move a program that I have been using on the Uno and Mega over to the Galileo. On my second read of udp.ParsePacket it just...
View Article