Cost in production
When I've finished my prototype and want to go into production is there any way to get the cost down? Or am I at a minimum of ~50 USD for the each Edison?
View ArticleClik here to view.
Re: digitalWrite and MRAA digitalWrite
HI, if you look at posting the trace shows the frequency shows something like 1.8mhz, and that is for complete cycle low.To high back to low. That was before I did some changes to peecompute address...
View ArticleRe: Critical Issues with Intel HD4600 Graphics Drivers 15.36.7.3960
Additional info, have also tried all different options/combinations of settings related to Sleep, ie hybrid sleep On/Off, Hibernate On/Off, and also related to USB ports, ie USB Selective Suspend...
View ArticleRe: D54250WYKH Wireless mouse & keyboard issues
Sorry didn’t notice this reply - I think I’d lost interest in this thread as there was little helpful response. I did manage to work around the problem using a short USB extension and blu tack to...
View ArticleApplication Running On Powerup
How do I set an application to run automatically once the Edison is powered up?
View ArticleRe: 3-Display Issues with HD Graphics 4000 Laptop (HDMI & VGA Config)
Anything yet Sylvia_intel? Let me know if you need anything else to figure this out. Thanks
View ArticleHow to make CUPS a JetDirect/AppSocket print server?
I have a Gen1 Galileo board and I use a minimal Debian image that I created with debootstrapCUPS package is already setup and running on the Galileo Here are the steps I've done so far: 1. Add the...
View ArticleRe: IoT developer kit (beta) announced
Big support for Visual Studio. That is where I spend my entire life during my day job. C# would be nice.
View ArticleJust Started: Using two of a Component(SD,USB)
Hello Galileo Community ! I just started and I have been going through some code for starting and I notice alot of items are called such like SD.DoSomething or Serial.Read .... What if I have 4...
View Articlemax temperature for i3 cpu
hi!Bunch of computers at work is running a bit jumpy. (we only just received them a week earlier we had them built)it runs an i3 4160 haswell. So we ran some stress test + monitoring to see if there...
View ArticleRe: converting .out to .elf format (in Ubuntu)
Hi mhahn, I was successfully able to achieve my target . We can close the thread. Thanks --Paridhi
View ArticleClik here to view.
Re: How to set a Static IP
Definitely it worked and as you can see, not only for me.Maybe something has changed with a newer Yocto release and you get Problems now?I can't say it because i switched to ubilinux some weeks ago.
View ArticleRe: Using Arduino IDE with Edison breakout board?
Sounds great:Currently I have a variant that I have built with the pin information that matches what is in MRAA. Actually it is a good exercise as I found a bug in the MRAA table, which was fixed...
View ArticleRe: how to change MAC address without using Dediprog programmer
I have Flash+platformdata.bin file. This file was created using Board_Support_Package_Sources_for_Intel_Quark_v1.0.1. But, I have no idea. How to proceed further? Sorry if I am wrong. Can I convert...
View ArticleRe: i notice that gcc is installed, allowing native development
yes, that did the trick!
View ArticleRe: Mraa and Edison
Actually today it got a lot easier First configure your self to be able to install stuff from AlexT_Intel repos. Then to do the above, you should be able to do: opkg install gitopkg install cmake And...
View ArticleRe: Install ROS Indigo on Edison?
Not yet, I was able to get a ways, but I have not taken the time yet to figure out how to get around lots of the stuff that is not installed. Will try to take a look again once I get the Arduino stuff...
View ArticleRe: /dev/root out of space
Others can probably answer this better than me, but here is what I have run into. 1) Log files eating up all of the room. Several threads have talked about this. When I run into this I usually do...
View ArticleRe: Linux VM pre-configured for Galileo BSP building - released
AlexT_Intel wrote: [...] Currently there's only OVF format available as the most universal one, but let me know if you're interested in some other one - SUSE Studio claims to support a bunch of them....
View Article