Re: Linux VM pre-configured for Galileo BSP building - released
Thanks for creating this. I've downloaded it and may try it later. Before stumbling upon this thread, I also wanted an appropriate VM and so downloaded: Debian 7 amd64 - VMware appliance, image -...
View ArticleHD4000 FPS Reduction Over Time
I am noticing very poor FPS with the lowest settings while playing World of Warcraft: Warlords of Draenor. When the game first boots up, I see very high fps. It continues to run this way for awhile...
View ArticleClik here to view.
zeroconf/bonjour with multihomed Edison
Using Ubuntu 14.10 (and my handy hub), when i connect my USB cable I get an logical Ethernet connection on 192.168.2.1. I can putz with manually assigning a DNS address to get on the Edison's hosted...
View ArticleWhat is the XDK Emulator IP Address?
When running the XDK IOT edition can I use the emulator to connect to my edison board? I seems like it should work if the emulator has a IP address and is connected to the host PCs network stack. My...
View ArticleClik here to view.
Re: Eclipse failed to connect sshd
Hi mhahn, I solved the problem.In Ubuntu network settings, in the ipv4 settings, previously I was using manual setting which fix the address, netmask, gateway.Then I switched to "shared to other...
View ArticleRe: How to install a kernel from my repo onto Edison with the official image
Maybe you forgot to install the 'bcm4334x' module? "lsmod" shows if it is loaded.
View ArticleRe: Intel Edison USB host mode
I disabled in /etc/network/interfaces the usb iface used for ethernet (192.168.2.15) because i don't need it. Could it be a reason for your problem (i'm not sure) ?
View ArticleRe: Application Running On Powerup
You can also try to replace "network.target" by "network.service". I do so on my Archlinux pc's and it works fine.
View ArticleRe: How do I build a new Edison kernel?
You can download this file::Intel® Download Center It is the complete Yocto package and includes also the kernel sources and patches.Good luck!
View ArticleRe: DCCP847DYE mSATA not recognized after Ubuntu 10.04 install
Sorry took so long for a reply here. Secure erase did not work. I did some crazy reset thing where you let the system sit in the BIOS for like 20-30 minutes, once or twice (can't remember the whole...
View ArticleClik here to view.
Re: Edison Driver Setup 1.0.0 dows not install on Windows 10
I resolved it. Might not need all steps, but this worked for me. Using Windows 10 Build 9879.Right mouse click on Edison Driver Setup 1.0.0 and select Properties from the context menu.Click...
View ArticleEdison Driver Setup 1.0.0 dows not install on Windows 10
As developers moved to Windows 10 and Visual Studio 2015, please update the Edison Driver Setup to be compatible with Windows 10.Also make IDE available on Visual Studio 2015 to keep Intel Edison...
View ArticleClik here to view.
Re: DCCP847DYE mSATA not recognized after Ubuntu 10.04 install
Hey Joe, sorry, didn't even see your last message. No, the drives are no longer recognized in the BIOS. These are the same Crucial SSD's. I have an ADATA drive here that I could test with. The Crucial...
View ArticleRe: Having trouble connecting wifi to gen 2
Sorry for the late reply. I dont have my gen 2 board to try and change the MAC address.
View ArticleRe: Trouble getting started with Edison and the Mini breakout board
xfstk is an Intelligent tool and can be downloaded and built from the internet. That said you might not need it - there is a thread within this forum showing how you can run flashall --recovery without...
View ArticleRe: add mysql on edison
If you don't mind a Toto rebuild you can use the method described elsewhere in this forum. I do have 2G roots size with that...
View ArticleRe: add mysql on edison
Hi mhahn, Can you tell me how to do it ? Thank you! Regards, wumf
View Article